Radio-shack 900MHz Manuel d'utilisateur télécharger pdf (Page 17)

17Basic Operation

USING HOLD

Press

HOLD

to place a call on hold. The

indicator for that line lights red on the

base. While a call is on hold, you can

temporarily place the handset on the

base or use the other phone line without

disconnecting the current call.

To release a line from hold and continue

your conversation, press that line’s but-

ton on the handset or base. You can

also release a call from hold by lifting the

handset if the handset is on the base, or

picking up an extension phone.

To release a line that was placed on

hold using another keypad (handset,

base, or an extension phone), press that

line’s button twice.

Note:

Pressing

HOLD

again while a call

is on hold does not release the hold.

Press the line button that is on hold.

SWITCHING BETWEEN

THE HANDSET AND

SPEAKERPHONE

To switch to the speakerphone while

you are using the handset, press

HOLD

on the handset, then press

LINE 1

or

LINE 2

on the base.

To switch to the handset while you are

using the speakerphone, lift the handset

off the base. Or, if the handset is off the

base, press

HOLD

on the base, then

press

LINE 1

or

LINE 2

on the handset.

USING BOTH THE

HANDSET AND

SPEAKERPHONE

To use the handset to join a call at the

base, or to use the base to join a con-

versation at the handset, press the line

button for the line that is in use. You

hear a busy tone. Before the tone ends,

press the line button again.

During the call, one of you can hang up

and the call can continue. To end the

call, you must hang up both the base

and handset.

Note:

If you hear a high-pitched noise

from the base’s speaker, the handset

and the base are too close together.

To talk with two parties using both lines,

see “4-Way Conferencing” on Page 18.

MAKING A CONFERENCE

CALL

3-Way Conferencing

Follow these steps to use both phone

lines to set up a 3-way call. The proce-

dure is the same for the handset and the

base.

1. Place the first call on hold.

2. Answer a call on the other line.

3. Once you have the second party on

the line, press

CONFERENCE

(

CONF

on the handset) to bring in the first

party. Both line indicators on the

base light green.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Commentaires sur ces manuels

Pas de commentaire