Cat. No. 43-941OWNER’S MANUALPlease read before using this equipment.CID-9414-Line Display Caller IDwith Call Waiting43-941.fm Page 1 Friday, Januar
102. Insert a flat blade screwdriver into the slot next tothe battery compartment cover and gently pry itup until the cover pops off.3. Place the batt
11MAKING THE CONNECTIONSConnecting an AC AdapterTo increase the battery life, you can power the CID-941 using a 9V, 200 mA AC adapter and a size MAdap
12Follow these steps to use an AC adapter (not sup-plied.)1. Insert the Adaptaplug into the socket on your ACadapter’s cord.2. Insert the barrel plug
13Caution: Resetting the CID-941 also clears all storedcall information.Note: If the CID-941 does not work after you reset it,replace the batteries (s
14• You can connect up to four CID-941s to thesame phone line (see “Using the Master/Sec-ondary Switch” on Page 15). For proper CallWaiting operation,
15Using the Master/Secondary SwitchThe CID-941’s M/S (master/secondary) switch letsyou easily connect up to four CID-941 Caller ID mod-ules to the sam
16• If you connect another type of Caller ID modulethat has Call Waiting (other than a CID-941) tothe same phone line as your CID-941’s, the CallWaiti
174. Plug the other end of the cord into L1 or L25. Repeat Steps 3 and 4 to connect another CID-941 to the jack (L1 and L2) on the triplexadapter.6. S
18MOUNTING THE SYSTEMYou can set the CID-941 flat on a desk, shelf, table orset it at an angle by pulling out the leg located on thebottom of the CID-
195. Align the keyhole slots on the back of the CID-941 with the screw heads and slide the systemdown over the screw heads.SETTING THE DISPLAY LANGUAG
2© 2000 Tandy Corporation.All Rights Reserved.RadioShack is a registered trademarkused by Tandy Corporation.WARNING: To reduce the risk of fire or sho
20To display text in Spanish, repeatedly press REVIEW or until NO CALL or XX CALLS appears.Then hold down REVIEW until NO LLAMADA orXX LLAMADAS ap
213. Repeatedly press REVIEW to increase thecontrast up to 15 or REVIEW to decreasedown to 00.Note: If CONTRAST level number disappears be-fore yo
22OPERATIONRECEIVING AND STORING CALLSCaller ID is a service provided by your telephonecompany. When you subscribe to this service, thetelephone compa
23the time display, but the red indicator flashes untilyou review the call records. Note: If you have a phone that has a hold feature, wedo not recomm
24CALL WAITING WITH DUAL DISPLAYIf you are using the telephone and you subscribe toCall Waiting service and a new call comes in, thesystem will show t
25Press FLASH to switch to the new call. The first call-er’s information moves to the second and third rowsand WAIT flashes.Press FLASH again to switc
26REVIEWING CALL RECORDSTo see how many calls are stored, press REVIEW or while the time displays. XX CALLS appearson the display.To view the call
27DISPLAYED CALL INFORMATIONThe CID-941 displays the following information:Display DescriptionXX Appears when you are viewing a new call record or hav
28UNKNOWN NAMENBR DESCONOCIDOThe caller is not within a Caller ID service area that provides either the name or number.UNKNOWN NUMBERNO. DESCONOCIDOTh
29CALL-Fd BUSYCFd OCUPADOThe call was forwarded from a number set to forward a call if the line is busy.LDCLDCThe call is long distance.xXxXAppears wh
3FEATURESYour RadioShack CID-941 4-Line Display Caller IDgives you access to the latest in telephone technolo-gy. It displays the current date/time an
30WAITESPERAAppears when you have a call on Call Waiting. The name and number of the caller also appear, if available.XX NEW CALLXX NUEVOShows the num
31DIALING NUMBERS FROM CALL RECORDSTo dial a telephone number stored in the Caller IDcall record memory, press REVIEW or to re-view the desired ca
32Same Area CodeTo call back a number received by the CID-941 thathas the same area code (for example, the number re-ceived by the system is “81755512
33DELETING CALL RECORDSYou can delete individual call records or all callrecords stored in the system.To delete a single record, press REVIEW orunt
34TROUBLESHOOTINGif your CID-941 is not working as it should, these sug-gestions might help eliminate the problem.Problem Suggestion Frequently displa
35If the system displays a message that you do not un-derstand, see “Displayed Call Information” onPage 27.Call Waiting does not work.If you have mult
36CARETo enjoy your RadioShack CID-941 4-Line DisplayCaller ID for a long time:• Keep the CID-941 dry. If it gets wet, wipe it dryimmediately.• Use an
37THE FCC WANTS YOU TO KNOWIn the unlikely event that your CID-941 causes prob-lems on the phone line, the phone company can dis-connect your service.
38LIGHTNINGYour telephone has built-in protection circuits to re-duce the risk of damage from surges in phone line orpower line current. These protect
39Limited One-Year WarrantyThis product is warranted by RadioShack against manufacturing de-fects in material and workmanship under normal use for one
4Caller ID Memory Dialing — lets you select a storedphone number from Caller ID memory, then dial itwith the touch of a button.New Call Indicator — fl
ZIM139700001A00 Printed in China(Continued) refund is made, become the property of RadioShack. Newor reconditioned parts and products may be used in t
5Important Information:• To use the system’s Caller ID, and Call Waitingfeatures you must be in an area where thoseservices are available from your ph
6draw as the device’s ringer equivalence number, orREN. The REN is on the bottom of your system.If you are using more than one phone or other deviceon
7CONTENTSPreparation ... 9Installing Batteries ... 9
8Deleting Call Records ... 33Troubleshooting .... 34Care ...
9PREPARATIONINSTALLING BATTERIESYour CID-941 requires 2 AA batteries (not supplied)to protect the system’s memory during a power fail-ure. For the bes
Commentaires sur ces manuels