Radio Shack PRO-136 Manuel d'utilisateur télécharger pdf (Page 11)

Scanner Setup

BANK 1 PGM

DLY

Example shows entering bank 1 channel 00.

Note: If you entered an invalid bank or channel number, Error

appears and the scanner beeps. Enter a valid bank or channel.

5. Use the number keys to enter the frequency, pressing

•

/CLR/DELAY for

the decimal point.

6. Press ENT/PROGRAM to store the frequency into the channel.

7. To program the next channel in sequence, press S or T and repeat

Steps 5 and 6.

Notes:

• If you entered an invalid frequency in Step 5, Error appears and the

scanner beeps. Enter a valid frequency.

• If you entered a frequency in Step 5 that already exists on another

channel, the scanner beeps and displays that channel. Press

•

/CLR/

DELAY to clear the display, or press ENT/PROGRAM to store the

frequency in both channels.

• The scanner automatically rounds the entered number to the nearest

valid frequency. For example, if you enter 151.473 (MHz), your scanner

accepts it as 151.475.

• After a transmission, the scanner automatically pauses for 2 seconds on

the channel before proceeding to the next active transmission. Press

•/CLR/DELAY to turn the delay function on or off. The scanner stores

this setting in the channel.

If you do not have a list of frequencies in your area, you can use a ﬁne tune

or service search to ﬁnd transmissions. You can also use an online resource

such as www.radioreference.com.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Pas de commentaire

Radio Shack PRO-136 Manuel d'utilisateur Page 11