Radio Shack 49-1000 Guide de l'utilisateur

Naviguer en ligne ou télécharger Guide de l'utilisateur pour Systèmes de contrôle d'accès de sécurité Radio Shack 49-1000. Radio Shack 49-1000 User`s guide Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Please read this user’s guide before
installing, setting up and using your new product
www.radioshack.com
Thank you for purchasing your Wireless
Security Keychain Remote from
RadioShack.
keychain remote
Two CR2016 lithium batteries (installed)
what’s included
1. Press and hold down arm for 3-4 seconds,
and then release it.
Note: If you need to register the keychain
remote a second time, remove the batteries,
and then hold down arm for 3-4 seconds to
pick up a random code.
2. Press menu start or on your security
system console. ENTER PIN (Personal
Identification Number) appears on the
display.
3. Use the console keypad to enter your four-
digit PIN. * appears on the display as each
digit is pressed. After you enter your PIN, 1.
INSTALL appears.
4. Press ok and 1. INSTALL / ZONE appears.
5. Press any button on your keychain remote.
RMOT 1 SET appears on the console display
to confirm registration.
6. Press clear to return to the setup screen.
Press clear again to confirm your exit from
setup mode. Press 1 to return to the main
display, or press 2 to stay in setup mode.
See your Wireless Security Kit User Guide (49-
1000) for instructions on changing your PIN.
49-1002
Wireless Security
Keychain Remote
registering your keychain remote
Use your wireless keychain remote to arm and disarm your Wireless Security Kit
(49-1000). Your Wireless Security Kit includes one keychain remote, and you can purchase
up to 15 additional keychain remotes (16 total) to use with your system. Your keychain can
also control devices connected to remote modules (such as a lamp) that are controlled by
your Wireless Security System. Your keychain includes random digital security coding for
enhanced security.
Press to arm your security system (door/window sensors,
motion detectors).
Press to disarm your security system.
on and off (A and B) allow you to turn on and off up to two
devices that are connected to home automation modules,
such as a 61-3002 Lamp Module. Use this feature to turn lights
on and off while you are away from home.
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Keychain Remote

Please read this user’s guide before installing, setting up and using your new productwww.radioshack.comThank you for purchasing your Wireless Securit

Page 2 - FCC information

arming the systemPress arm on your keychain remote. All door/window sensors and motion detectors that are part of your security system are armed insta

Commentaires sur ces manuels

Pas de commentaire