Radio Shack Regulated Power Supply Spécifications télécharger pdf (Page 21)

Your transceiver has a configuration menu that lets you modify operation

settings. Each of the following sections explain how and when to use each

configuration menu and select options.

1. Press VF.

2. Press F+M-SET. The first menu item appears.

3. Press \/SC or /\SC to step down or up through the menu items. Rotate

TUNE to change the menu settings for any menu item.

4. Press PTT to exit the configuration menu and save all settings.

The configuration appears in the following order:

CODE FACTORY DEFAULT EXPLANATION

oS 0.600 Duplex separation (offset)

tc oFF Transmit subaudible tone

rc oFF Receive subaudible tone

Sr 15 Frequency step

Sc ti Scan resume

Sd 2.0 Scan delay time

S1 144.000 Lower scan range limit

S2 148.000 Upper scan range limit

ud dn Vacant channel scan direction

PS 1-16 Power save duty cycle

tE oFF Transmit inhibit

to oFF Transmit time-out

Lb 4 Priority-frequency channel lookback time

Ar oFF Touch-tone auto-reply

SETTING THE DUPLEX SEPARATION DEFAULT

The duplex separation default (offset) controls the offset between the

transmit frequency and the receive frequency when you use the transceiver

in duplex mode, as with a repeater. Typically, on the 2-meter band,

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Pas de commentaire

Radio Shack Regulated Power Supply Spécifications Page 21