Radio Shack 43-141 Manuel du propriétaire télécharger pdf (Page 9)

9

2. Attach the connector on the bat-

tery to the connector inside the

battery compartment.

3. Replace the battery compartment

cover.

After you connect the battery, you

must set up the base then charge the

battery.

INSTALLING THE TAPE

Follow these steps to install the sup-

plied microcassette tape.

1. Turn the supplied microcassette’s

hub with a pencil to take up any

tape slack.

2. Lift up on the left side of the cas-

sette compartment cover on top of

the base to open it.

3. Install the microcassette in the

cassette compartment with the

open edge of the cassette on the

left and the full reel toward the

front of the TAD.

Notes:

• You can buy additional microcas-

settes or microcassettes of a dif-

ferent length at your local Radio

Shack store.

• Replace the tape at least once a

year — more often if it is used

heavily.

CONNECTING TO

POWER

1. Insert the AC adapter’s barrel plug

into the

DC IN 7.5V

jack on the

back of the base, then thread the

supplied AC adapter’s cord

through the strain relief slot under

the base.

Note:

Use only the supplied AC

adapter as your phone’s 7.5V DC

500 mA power source.

43-738.fm Page 9 Friday, August 13, 1999 1:51 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 51 52

Commentaires sur ces manuels

Pas de commentaire