10
OPERATION
Before you use your CB, you should
know how to use it effectively and cour-
teously. “Operational Hints” on Page 12
contains information that will help you
get more enjoyment from your CB.
RECEIVING
TRANSMISSIONS AND
ADJUSTING SQUELCH
1. Turn SQUELCH fully counterclock-
wise.
2. Turn on the transceiver by turning
VOLUME clockwise until it clicks. The
channel display lights and the chan-
nel appears, and the RX indicator
lights.
3. Set
OUT CH9 CH19 to OUT to select
a channel other than an emergency
channel.
4. Rotate the channel selector until the
display shows the desired channel.
5. Adjust
VOLUME to a comfortable lis-
tening level.
6. To cut out background noise
between transmissions, wait until
there is no signal, then slowly turn
SQUELCH clockwise until the back-
ground noise stops.
Note:
To receive very weak signals,
turn
SQUELCH counterclockwise.
You hear noise between transmis-
sions, but you also hear weak trans-
missions (those not strong enough
to break through a higher squelch
setting).
7. To turn off the CB, turn
VOLUME
counterclockwise until you hear it
click. The display and indicators turn
off.
21-1703.fm Page 10 Wednesday, June 2, 1999 4:35 PM
Commentaires sur ces manuels