Radio Shack 43-222B Guide de l'utilisateur Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
This product is warranted by RadioShack against
manufacturing defects in material and workmanship un-
der normal use for one (1) year from the date of purchase
from RadioShack company-owned stores and authorized
RadioShack franchisees and dealers. For complete
warranty details and exclusions, check with your local
RadioShack store.
RadioShack Customer Relations
200 Taylor Street, 6th Floor, Fort Worth, TX 76102
04/04
©2004. RadioShack Corporation.
All rights reserved. RadioShack and
RadioShack.com are trademarks
used by RadioShack Corporation.
61-3001
06A04
Printed in China
Intercom Systems
Intercom systems, which send voice signals over existing electrical wiring may
interfere with the operation of your Mini Controller when the intercom is in use. If the
Intercom system has its own separate wiring, it will not cause a problem.
Power Interruptions
When the power is restored after an outage, Lamp Modules and Wall Switch
Modules normally will be off. Appliance Modules will remain as they were before the
interruption.
Local Control
Lights and appliances connected to plug-in modules can be turned on with their own
power switch. Simply turn the switch off and then on again once or twice. For lamps
with three-way bulbs, you might have to rotate the power switch a few times before
the light comes on.
Your Wall Switch Module can be turned on and off locally using its push button. The
power On/Off switch on your Wall Switch Module is used to completely turn the
power off, for example, when changing a light bulb.
If a specifi c module won’t turn on or off
when using your Mini Controller, do the
following:
Make sure you have power to the outlet
controlling the module, and the switch
for the light and/or appliance is on.
Make sure the Unit Code on the module
is set to the correct number. Check the
Unit Code (1-4 or 5-8) on your Mini
Controller. Make sure the House Code
on the module is set correctly. The
House Code on the module and the Mini
Controller must be set to the same letter.
Try plugging your Mini Controller and
module into the same outlet. If the
module doesn’t work in any outlet, the
module might be defective. Contact your
local RadioShack store for assistance.
If none of the modules will turn on or off
when using your Mini Controller, do the
following:
Make sure you have power to the outlet
for your Mini Controller.
Make sure the House Code on your Mini
Controller is set correctly.
Try plugging your Mini Controller and
module into the same outlet. If none of
your modules work in any outlet, your
Mini Controller might be defective.
Contact your local RadioShack store for
assistance.
Vue de la page 1
1 2

Commentaires sur ces manuels

Pas de commentaire