Radio-shack PRO-29 Manuel d'utilisateur télécharger pdf (Page 20)

Limit Search

A limit search lets you search for active frequencies between upper and

lower limits that you set.

-L-

appears on the display during a limit

search.

1. Press

PROGRAM

, then

LIMIT

. Lo

appears on the display.

2. Enter the lower limit of the frequency range you want to search.

3. Press

WX/E

, then

LIMIT

. Hi

appears on the display.

Note:

If the frequency you entered is not a valid frequency,

Error

appears. To enter a different frequency, start again from

Step 2.

4. Enter the upper limit of the frequency range.

5. Press

WX/E

, then

LIMIT.

and the lower limit frequency appear

on the display.

6. Press

to search from the upper to the lower limit, or

to search

from the lower to the upper limit. The current monitor memory

number starts flashing at the top of the display.

7. When the scanner stops on a transmission you want to save,

press

MONITOR

to store the frequency in the current monitor mem-

ory. The monitor number then stops flashing.

8. Press either

to continue the search. If you saved a frequency

in a monitor memory, then the monitor memory number on the dis-

play advances by one and starts flashing again. (If the last monitor

memory was 6, the scanner returns to monitor memory 1.)

9. To hold the frequency, press

LIMIT

-H-

appears on the display.

To exit the hold mode and resume the limit search, press

LIMIT

again.

Notes:

• You can press

during the hold mode to step through the

frequencies toward the upper or lower limits.

• If you tune to a search skip frequency, the display shows

L/O

(see “Search Skip Memory”).

20-509.fm Page 20 Wednesday, August 4, 1999 1:58 PM

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Radio-shack PRO-29 Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Scanners Radio-shack PRO-29