Radio-shack 15-1925 Manuel d'utilisateur télécharger pdf (Page 20)

Need help? Call

1-800-950-7044

IF YOU HAVE PROBLEMS

MANUAL CODE SEARCH

If the 6 in 1 IR/RF Remote Control does not oper-

ate your remote-controlled devices when you first

set it up, you might have to find the correct code

for your devices. You can try all the codes listed

in the “Manufacturer’s Codes” section on Page 26

for the brand of your device, or you can follow

these steps to search the 6 in 1 IR/RF Remote

Control’s entire library.

1. Manually turn on the device you want to set

up and press the corresponding device key

on your 6 in 1 IR/RF Remote Control (

VCR

CBL

, and so on).

2. Aim the 6 in 1 IR/RF Remote Control at the

device you want to operate.

3. Hold down

SET UP

until the red light blinks

twice. Release

SET UP

and press

–

The red light blinks twice again.

4. Slowly alternate between

PWR

and the

device key.

For example, if you are searching for a code

to operate your TV, use the following

sequence.

SET UP

–

PWR

–

PWR

–

PWR

...

Each time you press the TV key, the remote

control advances to the next manufacturer’s

code in the library.

5. When your device responds by turning off (or

on, if it was off), immediately press

SET UP

lock in the manufacturer’s code.

Note:

Because of the large number of codes in

the 6 in 1 IR/RF Remote Control’s library, this pro-

cedure can take several minutes. If your device

turns off during the search, but does not operate

after you lock in the code, begin the search again,

pausing longer between key presses.

15-1925.fm Page 20 Monday, July 19, 1999 12:59 PM

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Radio-shack 15-1925 Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Contrôle à distance Radio-shack 15-1925