Radio Shack Easy Remote Manuel du propriétaire télécharger pdf (Page 12)

Need help? Call

1-888-533-7135

Determining the 3-Digit Code

After you set up your remote control using manual

code search, you can find which 3-digit code the

remote control is set to by following these steps.

1. Press the device key you want to get the

manufacturer’s code from, then hold down

until the red light blinks twice.

2. Press

9 9 0

. The red light blinks twice again.

3. Press

then count the number of times the

red light blinks. This is the first digit of the 3-

digit code.

Note:

If the red light does not blink, the digit

is a 0.

4. Repeat Step 3 twice to find the second and

third numbers of your 3-digit manufacturer’s

code, pressing

and

respectively for each

additional digit.

TROUBLESHOOTING

If the remote control stops working after you have

successfully tested the control for each device, or

if you are unable to get the remote control to work

at all, check these things:

• Be sure you press the device key for the

device you want to control before you press

any other key.

• Confirm that your remote control devices are

working properly by using the original remote

control or the manual controls.

• Replace the batteries.

• If some of the keys do not function for your

device, you might be able to find a better

device code.

15-1931.fm Page 12 Monday, July 19, 1999 2:26 PM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Radio Shack Easy Remote Manuel du propriétaire Page 12