Radio Shack 7-in-1 Remote Control with Lighted Keypad Manuel du propriétaire télécharger pdf (Page 13)

Need help? Call

1-800-989-4706

13

Entering a Plug

’

n Power House Code

Your IR Command Console or Plug ’n Power

Wireless Remote Control System uses a master

code called a

house code

(see your IR Command

Console’s or Plug ‘n Power Wireless Remote

Control System’s Owner’s Manual for more infor-

mation).

1. Press

Plug ’n Power

on the 7-in-1 Remote

Control.

2. Hold down

SET UP

on the 7-in-1 until the red

light above turns on.

3. Use the 7-in-1’s number keys to enter the

numbers equivalent to the house code’s let-

ters (

1

for A,

2

for B,

3

for C, and so on).

For example, if the house code is C, press

3

.

4. Press

ENT

on the 7-in-1.

When the red light turns off, the 7-in-1 has

accepted the code.

Note:

If the code you entered is invalid, the

red light flashes for about 3 seconds then

turns off. Start again from Step 1.

Controlling Lights and Appliances Using

an IR Command Console

Follow these steps to control Plug ’n Power mod-

ules with your 7-in-1 using an IR command con-

sole.

1. Position the IR command console within the

7-in-1’s line of sight.

2. Plug the IR command console’s power cord

into any standard AC outlet.

3. Set the house code dial on top of the IR com-

mand console to the same letter as your

Plug ’n Power modules.

4. Set the selector switch on the IR command

console for the group of modules you want to

control (1–4 or 5–8).

15-1924.fm Page 13 Monday, July 19, 1999 12:50 PM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

Commentaires sur ces manuels

Pas de commentaire