Radio Shack Video RF Modulator Manuel du propriétaire

Cat. No. 15-1283OWNER’S MANUALPlease read before using this equipment.RF MODULATOR15-1283.fm Page 1 Thursday, July 15, 1999 2:19 PM

10OPERATION1. Turn on the TV and set it to either channel 3 or 4,whichever of the two is not used for regular broad-casts in your area.2. Set the RF M

11Notes:• The first time you set MOD/ANT to MOD, turn onthe input source connected to the RF Modulator’sAUDIO IN/VIDEO IN terminals, then set OHMS 1K/

RADIO SHACKA Division of Tandy CorporationFort Worth, Texas 761028A5 Printed in ChinaSPECIFICATIONSVideo Carrier Output Level...

2Warning: To prevent fire or shock hazard, do not ex-pose this RF Modulator to rain or moisture.This symbol is intended to alert you to thepresence of

3INTRODUCTIONYour Radio Shack RF Modulator is designed to con-vert the separate audio and video signals (from a vid-eo camera, computer, portable VCR,

4Try to eliminate the interference by:• Moving your RF Modulator away from the receiver.• Connecting your RF Modulator to an outlet that is ona differ

5PARTS REQUIREDYou need the following items, not supplied with your RFModulator, to connect it between a video input source(video camera, satellite re

6CONNECTIONSFollow these steps to connect your RF Modulator.1. Connect an audio/video cable between the videooutput jack on your video source and the

73. Connect the 75-ohm coaxial cables to the RF Modu-lator following these guidelines:• If your TV is already connected to another VHFinput source (su

8• If your TV is not already connected to anotherVHF source:a. Connect the input source’s (antenna, cable TV,VCR, etc.) 75-ohm cable to the RF Modulat

94. Plug the RF Modulator’s power cord into a standardAC outlet.(illus)15-1283.fm Page 9 Thursday, July 15, 1999 2:19 PM