Radio Shack XTS 36 Manuel d'utilisateur télécharger pdf

Optimus and Radio Shack are registered trademarks used by Tandy Corporation.

XTS 36 MINI SPEAKER

Cat. No

. 40-1994

OPTIMUS

CONNECTING THE SPEAKER

You need speaker wire (not supplied) to con-

nect the speaker to your receiver or amplifier.

We recommend you use wire that is color-cod-

ed or marked on one side. Use 18-gauge or

larger speaker wire for distances up to 50 feet.

For greater distances, use 16-gauge wire. Your

local Radio Shack store has a wide selection of

speaker wire.

Note

: For maximum bass response and the

best overall performance, be sure the polarities

match when you connect the speaker to the re-

ceiver or amplifier (positive to positive and neg-

ative to negative).

1. With the speaker in its appropriate loca-

tion, measure the distance from the

speaker to the receiver or amplifier. Then

route the proper length of speaker wire

from the speaker to the receiver or ampli-

fier.

Cautions:

• Avoid routing the speaker wire near

other electrical wires.

• Do not nail or staple the speaker wire.

2. Split apart 4 inches of speaker wire on

each end.

3. Strip

inch of insulation from each wire’s

end. Then twist the ends of the wire to

secure any loose strands.

4. While pressing and holding down the black

(negative) terminal tab on the back of the

speaker, insert one end of the negative

bare wire into the opening. Then release

the tab.

1/4 Inch

4 Inches

Speaker Wires

SPECIFICATIONS

Frequency Response

140 Hz— 20 kHz

Power Handling

15 watts (RMS)

Maximum Power

30 watts

Impedance

Speaker Complement

3” (7.62 cm) full ran

Enclosure:

Sealed hi

h density plastic cabinet for

extended bass response

Dimensions:

¥ 3

Inches (HWD)

(14.2

9.0

8.5 cm )

Shipping Weight:

1.4 lbs. (0.6 k

)

Ω

40-1994.fm Page 1 Wednesday, August 11, 1999 8:11 AM

1 2 3 4

Résumé du contenu

Page 1 - CONNECTING THE SPEAKER

Page 2 - Connections for Two S

RADIO SHACKA Division of Tandy CorporationFort Worth, Texas 761027A5 Printed in Malaysia5. Repeat Step 4 to insert one end of the pos-itive bare wire

Page 3 - 7A5 Printed in Malaysia

RADIO SHACKA Division of Tandy CorporationFort Worth, Texas 761027A5 Printed in Malaysia40-1994.fm Page 3 Wednesday, August 11, 1999 8:11 AM

Page 4

RADIO SHACKA Division of Tandy CorporationFort Worth, Texas 761027A5 Printed in MalaysiaRADIO SHACK LIMITED WARRANTY This product is warranted against

Commentaires sur ces manuels

Pas de commentaire

Radio Shack XTS 36 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Haut-parleurs Radio Shack XTS 36. Radio Shack XTS 36 User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Haut-parleurs Radio Shack XTS 36