Radio-shack 63-1120 Manuel d'utilisateur télécharger pdf (Page 3)

to positive and its plug must fit the compass' jack. Using an

adapter that does not meet these specifications could

damage the compass or the adapter.

• Always connect the DC adapter to the compass before you

connect it to the power source. When you finish, disconnect

the adapter from the power source before you disconnect it

from the compass.

Note: Since not all vehicles have constant power supplied to the

power outlet, two AAA batteries are required to retain the

compass calibration settings in memory (although they do not

power the compass when vehicle battery power is used).

Insert the barrel plug of the 12V DC adapter (not supplied) into the

DC12V jack on the back of the compass. Then insert the DC plug

into your vehicle’s power outlet.

MOUNTING THE COMPASS

Choose a clean mounting location on the vehicle’s windshield

where the compass is at least 5 inches away from any stereo

speakers and will not obstruct the driver’s field of view.

Your compass comes with three suction cups for secure

mounting.

1. Insert the small ball head of each suction cup into the larger

hole on the bottom of the bracket and slide it into the

bracket’s smaller hole so it fits tightly.

2. Place the compass in the holder.

Note: To remove the compass from the holder, simply slide it

out.

1 2 3 4 5 6 7 8

Pas de commentaire

Radio-shack 63-1120 Manuel d'utilisateur Page 3